King Post Retaining Walls | Keller United Kingdom

King Post Retaining Walls

King Post Walls are a simple and quick installation method comprising drilling a hole with a high powered CFA piling rig and then filling it with concrete and installing an H beam. This allows concrete pre-stressed panels or sleepers to be inserted between the webs of the H sections,which after excavation results in the finished embedded retaining wall.

King Post walls may be used for many different retention applications and heights in different ground conditions, including rock. We can use rigs with double rotary heads which can bore most soil and rock types.They are particularly suited to situations where a wall is to be installed from the lower level,avoiding forming a high level piling mat.

Applications are numerous including basements,embankment retention and flood defence walls

Where we've done it

A Victorian retaining wall holding up a section of the A628 in Tintwistle, Derbyshire, was found to be showing...

For this King Post Wall scheme, a Continuous  Flight Auger (CFA) piling technique was used to drill ...

  For this £1.0million scheme, Keller installed 70No. King Posts to allow the installation of 12...

At the site of a former car showroom Waitrose were developing a small new store. The engineering challenges we...

Information Resource

See Heathfield and Darlaston Projects

Other things we do

We deliver cost effective foundation and ground engineering solutions safely - click on the arrows to find the techniques you are looking for.

Contact Us

Call us to discuss if you want help with a king post wall

Relevant Offices
Coventry 02476 511266

Contacts for Assistance:
Richard Smith
Nigel Matthews
Derek Taylor

For projects in Scotland/North East
Martin McAlinden (Dunfermline)
07918 691792

Sitemap
×